Implementasi IoT dan Android untuk Pemantauan dan Pemeliharaan Alat Pelindung Diri K3 di PT Paku Jaya
DOI:
https://doi.org/10.31004/jutin.v8i3.47356Keywords:
Personal Protective Equipment, IoT, ESP32, RFID, Android AppsAbstract
The construction industry has many factors that cause work accidents, but the most highlighted is worker awareness in using Personal Protective Equipment (PPE). This study develops an Internet of Things (IoT)-based monitoring system to maintain the quality of Personal Protective Equipment (PPE) in the storage room by monitoring environmental conditions and officer activities. This system is designed to monitor room temperature, humidity, and air quality to ensure that PPE is stored in standard conditions. In addition, the system is equipped with a Radio Frequency Identification (RFID) module to record and monitor the activities of officers entering and leaving the storage room. The ESP32 microcontroller is used as a data processing center connected to various sensors and RFID modules, and functions to send data in real time to the server via a Wi-Fi network. The test results show that the system is able to monitor room temperature conditions accurately in the range of 20-250C and air humidity at 40-60% and detect officer activities effectively. Indoor dust conditions are maintained below 10 mg/m3 by utilizing a blower fan. This system is expected to support safer, more efficient, and technology-based PPE storage management.References
Aisa Badjuka, S., Kawatu, Y. T., & Kesehatan Ligkungan Poltekkes Kemenkes Manado, J. (2014). Kadar Debu, Suhu dan Kelembaban di Ruang Produksi Industri Meubelud. Gunung Jati Kota Manado Tahun 2013. In Badjuka, dkk. Kadar Debu (Vol. 3, Issue 2).
Badan Pusat Statistik. (2024, December 27). Banyaknya Pekerja Tetap Perusahaan Konstruksi. https://www.bps.go.id/id/statistics-table/2/MjIzIzI=/banyaknya-pekerja-tetap-perusahaan-konstruksi.html
Hidayat, D., & Sari, I. (2021). Monitoring suhu dan kelembaban berbasis Internet of Things (IoT). Jurnal Teknologi Dan Ilmu Komputer Prima (JUTIKOMP), 4(1), 525–530.
Kementerian Kesehatan. (2002). Persyaratan Kesehatan Lingkungan Kerja Perkantoran Dan Industri. https://bikinpabrik.id/wp-content/uploads/2019/02/2-KMK-No.-1405-ttg-Persyaratan-Kesehatan-Lingkungan-Kerja-Perkantoran-Dan-Industri.pdf
Ketenagakerjaan, B. (2023a, May 11). Beragam Risiko yang Dihadapi Pekerja Konstruksi Setiap Hari. Https://Www.Bpjsketenagakerjaan.Go.Id/Artikel/17476/Artikel-Beragam-Risiko-Yang-Dihadapi-Pekerja-Konstruksi-Setiap-Hari.Bpjs.
Ketenagakerjaan, B. (2023b, November 1). Cari Tahu Yuk, Apa Saja Alat Pelindung Diri K3! . https://www.bpjsketenagakerjaan.go.id/artikel/17706/artikel-cari-tahu-yuk,-apa-saja-alat-pelindung-diri-k3!.bpjs
Khairat, U., Basri, B., & Fakhrurrozi, W. A. (2022). Monitoring Suhu Ruang Budidaya Jamur Tiram Menggunakan Android Berbasis Arduino. Technomedia Journal, 7(1), 1–10.
Kusumah, R., Islam, H. I., & Sobur, S. (2023). Sistem monitoring suhu dan kelembaban berbasis Internet of Things (IoT) pada ruang data center. Journal of Applied Informatics and Computing, 7(1), 88–94.
Leo, A., & Aziz, A. (2021). Perancangan Sistem Kunci Pintu Otomatis Mengunakan Rfid Arduino Uno. Jurnal Ampere, 6(1), 43–48.
Praing, D. T. L., & Purba, A. (2022). Monitoring Suhu Dan Infus Pasien Rumah Sakit Pasca Pandemic Berbasis Android. Prosiding Seminar Nasional Sains Dan Teknologi Terapan.
Putri, D. N., & Lestari, F. (2023). Analisis Penyebab Kecelakaan Kerja Pada Pekerja Di Proyek Konstruksi: Literature Review. Prepotif: Jurnal Kesehatan Masyarakat, 7(1), 444–460.
Software | Arduino. (n.d.). Retrieved May 26, 2025, from https://www.arduino.cc/en/software/
Suryanto, S., & Rizky, F. M. (2024). Perancangan Sistem Kontroling Dan Monitoring Kepadatan Debu Pada Sistem Pendingin Dan Tata Udara Untuk Skala Maintenance (Perawatan) Berbasis Internet Of Things (IoT). Jurnal INSAN Journal of Information System Management Innovation, 4(2), 101–110.
Systems, E. (2025). ESP32. https://www.espressif.com/en/products/socs/esp32
Tapala, C. N. D., & Wardhana, A. S. (2024). SISTEM PEMANTAU SUHU DAN KELEMBAPAN UNTUK MENINGKATKAN EFISIENSI PADA GUDANG PENYIMPANAN. Prosiding Seminar Nasional Teknologi Energi Dan Mineral, 4(1), 1132–1139.
UI | Flutter. (n.d.). Retrieved May 25, 2025, from https://docs.flutter.dev/ui
Want, R. (2004). RFID. Scientific American, 290(1), 56–65.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Muhammad Aqifur Rohman, Denny Irawan
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
