Analisa Pengendalian Kualitas Produk HUBAB di PT. Dalwa Anugrah Hasaniyah Menggunakan Metode Six Sigma
DOI:
https://doi.org/10.31004/jutin.v8i3.46006Keywords:
Quality, Six Sigma, DPMO value calculationAbstract
This study aims to evaluate the quality control of HUBAB brand bottled drinking water (AMDK) produced by PT. Dalwa Anugrah Hasaniyah using the Six Sigma method. Data were collected through observation, interviews, and literature studies of production data and defective products during December 2024 to January 2025. Based on the results of the analysis, the average value of Defects Per Million Opportunities (DPMO) was 1813.06 with a sigma level of 4.44. The most common types of defects include damage to the lid and cup leakage. The main factors causing lid damage include inadequate raw material quality, excessively high press machine temperatures, and worker carelessness. Meanwhile, the cause of cup leakage is due to the accumulation of raw materials exceeding the maximum limit, storage for too long, and operator negligence.References
Eliza, I. (2025). Analisis dan Perbaikan Dwelling Time Menggunakan Metode Six Sigma DMAIC Pada Proses Importasi di PT. XYZ. X(1).
Febriani, E., 1a, H., Fitriana, R., & Andriani, M. V. (n.d.). Perbaikan Kualitas Kemasan Pada Produk Air Minum Dalam Kemasan (AMDK) Botol 600 Ml Brand Club Dengan Metode Six Sigma Quality Improvement of Packaging in Bottled Drinking Water Products (AMDK) 600 Ml Brand Club With Six Sigma.
Widyarto, W. O., Firdaus, A., & Kusumawati, A. (2019). Analisis Pengendalian Kualitas Air Minum dalam Kemasan Menggunakan Metode Six Sigma. Jurnal INTECH Teknik Industri Universitas Serang Raya, 5(1), 17. https://doi.org/10.30656/intech.v5i1.1460
Kusumasari Yuliani, R., Syaichu, A., Kurniawati, D., Studi Teknik Industri, P., & POMOSDA Nganjuk, S. (2020). ANALISA KECACATAN PRODUK AIR MINUM DALAM KEMASAN TELAGA TANJUNG DENGAN PENDEKATAN SIX SIGMA. 14, 1.
Novitasari, D., Mukhlis, D., & Utomo, F. (2022). IDENTIFIKASI PENYEBAB KECACATAN PADA PROSES PEMBUATAN KECAP ASIN DI CV. INDOCOCO PACIFIC Identification of the Causes of Defects in the Process of Making Salted Soy Sauce at CV. Indococo Pacific. In 100 | Indonesian Journal of Food Technology (Vol. 1).
Yusuf, M., & Supriyadi, E. (n.d.). MINIMASI PENURUNAN DEFECT PADA PRODUK MEBLE BERBASIS PROLYPROPYLENE UNTUK MENINGKATKAN KUALITAS Study Kasus : PT. Polymindo Permata
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Khoiruz Zadit Takwah
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
