Rancangan alat bantu untuk perbaikan postur tubuh pada bengkel shockbreaker motor bekasi
DOI:
https://doi.org/10.31004/jutin.v8i1.41537Keywords:
MSMEs, Ergonomics, Working Posture, Rapid Entire Body Assessment (REBA)Abstract
With the growth of the economy and market demand, Micro, Small and Medium Enterprises (MSMEs) play a significant role in economic development by providing employment opportunities and enhancing local economic growth, typically through small-scale production by artisans and small producers. UMKM XYZ is a small-scale service business specializing in motorcycle shock absorber repairs, employing three workers. In this workshop, issues related to workers' postures were identified, which caused discomfort and potential health problems. The Rapid Entire Body Assessment (REBA) method was utilized to evaluate the workers' body posture, including the positions of the neck, back, arms, wrists, and legs. Consequently, sample data were collected and analyzed to implement improvements in the shock absorber repair process. An assistive tool was designed as a proposed solution to improve workers' postures to be more ideal, resulting in lower REBA scores.References
N. M. Dewantari, “Analisa postur kerja menggunakan REBA untuk mencegah musculoskeletal disorder,” Journal Industrial Servicess, vol. 7, no. 1, p. 33, Nov. 2021, doi: 10.36055/jiss.v7i1.12298.
A. Chaterina and M. Mahachandra, “ANALISIS POSTUR TUBUH SIKAP KERJA BAGIAN PACKAGING DENGAN METODE REBA UNTUK MENGATASI MASALAH MUSKOLOSKELETAL DISORDERS (MSDs).”
B, Yusrizal. (2023). Penilaian Postur Kerja Operator Stasiun Sampling Point Dengan Metode Rapid Entire Body Assessment (REBA) di PT X. Jurnal Teknik Industri Terintegrasi, Volume 6 Issue 1, Page 46-45
H, Ayu Nurul., Restuasih, Sinta., Harjiyanto, Kun. (2024). Perbaikan Postur Tubuh Pekerja UMKM dengan Intervensi Ergonomi Melalui Perancangan Kursi Fleksibel. Jurnal Teknik Industri Terintegrasi, 7(1), 212-219
R. Dewi Anjani, A. E. Nugraha, R. P. Sari, and D. T. Santoso, “PERANCANGAN ALAT BANTU KERJA DENGAN MENGGUNAKAN METODE ANTROPOMETRI DAN MATERIAL SELECTION PADA INDUSTRI SEPATU,” vol. 13, no. 1, 2021, doi: 10.24853/jurtek.13.1.15-24.
F. Johnson, “Analisis Postur Kerja dengan Menggunakan Metode Rapid Entire Body Assessment,” 2023, doi: 10.32734/ee.v6i1.1796.
H. S. Al-kautsar, L. A. Hafidza, and Y. M. Tampubolon, “Perancangan Alat Bantu Menggunakan Metode NIDA pada Stasiun Pengeleman Industri Sendal Kulit Magetan,” 2022.
M. Nur et al., “Analisis Postur Tubuh Pekerja Unit Finishing Pada Produksi Kertas Menggunakan Metode Ovako Working Analysis System (OWAS),” Jurnal Teknologi dan Manajemen Industri Terapan (JTMIT), vol. 2, no. 4, pp. 278–286, 2023.
I. Rahman1 et al., “Sosialisasi Fisioterapi Terhadap Pencegahan Postur Tubuh Yang Buruk Pada Siswa Di SDN Baros Mandiri 4 Kota Cimahi.”
M. K. Faudy and S. Sukanta, “Analisis Ergonomi Menggunakan Metode REBA Terhadap Postur Pekerja pada Bagian Penyortiran di Perusahaan Bata Ringan,” Go-Integratif : Jurnal Teknik Sistem dan Industri, vol. 3, no. 01, pp. 47–58, May 2022, doi: 10.35261/gijtsi.v3i01.6540.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Indra Yusuf Rangkuti, Lucyana Tresia, Dianasanti Salati, Irma Agustiningsih Imdam, Muhammad Fathur Achsan, Vivaldhi Megarukmana
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
