PEMANFAATAN SERAT JERAMI SEBAGAI PAPAN MATRIX COMPOSITE (PMC)

Emon Azriadi

doi:10.31004/jutin.v1i1.316

Authors

Emon Azriadi FST UP

DOI:

https://doi.org/10.31004/jutin.v1i1.316

Keywords:

Jerami

Abstract

Kampar Regency is one of the districts that has the largest oil palm plantations in Indonesia, with a plantation area of 241.5 thousand hectares and around 33 Palm Oil Mills (POM). In every palm oil mound industry which rises higher every day, waste in the form of shells and pulp fibers or straw fibers on the ground as large as a soccer field and also emits an unpleasant odor. Only a small portion of this waste is used as boiler fuel. One MCC can produce no less than 100 tons of fiber per week. This fiber has a high economic value, this fiber is easy to get, cheap, does not endanger health can be degredated (biodegradibility) so that if given the right handling with utilization as a composite reinforcing fiber can provide more benefits to the Palm Oil Mill (POM) and the environment in the treatment of these wastes

References

Arif, Yunito Akhmad, 2008, Analisa Pengaruh Fraksi Volume Serat Pada Komposit

Matriks Polyester Terhadap Kekuatan Tarik, Impact Dan Bending,

TeknikMaterial, ITS, Surabaya.

C.A.S.Hill, H.P.S.A.Khalil, Efect of Fiber Treatments on Mechanical Properties of Coir Oil Fiber Reinforced Polyester Composites, Journal of Applied Polimer Socience,vol 78,1685-1679, 2000.

Erwinsyah, Improvement of Oil Palm Wood Properties Using Bioresin, Dissertation, Institut fur Forstnutzung und Forsttechnik Fakultat fur Forst-,Geo-und Hydrowissenschaften Technische Univeritat Dresden : 2008.

Jamasri, Diharjo K, dan Gunesti, 2005, Kajian Sifat Tarik Komposit Serat Buah

Awit Acak Bermatrik Polyester, Media Teknika No. Daftar Pustaka

Techline, Wood Plactic Composite, forest product Laborator, Issued 01/04 2004.

V. Yadama, Residential Opportunities for Wood Plastic Composites, Wood Material and Engineering Laboratory, Washing State University, 2006