Perbandingan Nilai Kuat Tekan Beton Normal Menggunakan Hammer Test dan Compression Testing Machine

Authors

  • Laily Fatmawati Universitas Merdeka Madiun
  • Rochidajah Rochidajah Universitas Merdeka Madiun
  • Rosyid Kholilur Rohman Universitas Merdeka Madiun

DOI:

https://doi.org/10.31004/jpdk.v4i6.9846

Abstract

Terdapat beberapa bentuk metode pengujian kekuatan tekan yang dapat digunakan diantaranya pengujian – pengujian yang bersifat tidak merusak (non destructive test), dan yang merusak secara keseluruhan komponen – komponen yang diuji (destructive test).Pada penelitian ini dilakukan pengujian menggunakan hammer test dan compression testing machine,kemudian membanding kan hasil pemgujian dari masing-masing metode tersebut. Benda uji yang digunakan merupakan sampel dengan mutu K-200 dan K-250 berusia 28 hari, yang masing-masing mutu berjumlah 6 buah sampel.Berdasarkan hasil pengujian menggunakan hammer test baik pada benda uji mutu K-200 maupun K-200 memiliki perbandingan terhadap mutu rencana sebesar 17,09%. Sedangkan hasil pengujian menggunakan compression testing machine memiliki perbandingan tehadap mutu rencana sebesar 9,07%. Dan selisih antara pengujian hammer test dan compression testing machine sebesar 8,01%

Downloads

Published

2022-12-07

How to Cite

Fatmawati, L. ., Rochidajah, R., & Rohman, R. K. . (2022). Perbandingan Nilai Kuat Tekan Beton Normal Menggunakan Hammer Test dan Compression Testing Machine. Jurnal Pendidikan Dan Konseling (JPDK), 4(6), 9276–9285. https://doi.org/10.31004/jpdk.v4i6.9846

Issue

Vol. 4 No. 6 (2022): Jurnal Pendidikan dan Konseling: Special Issue (General)

Section

Articles

License

Copyright (c) 2022 Laily Fatmawati, Rochidajah, Rosyid Kholilur Rohman

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International License that allows others to share the work with an acknowledgement of the works authorship and initial publication in this journal. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journals published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).