As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.
The submission has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor).
The submission file is in OpenOffice, Microsoft Word, RTF, or WordPerfect document file format.
Where available, URLs for the references have been provided.
The text is single-spaced; uses a 12-point font; employs italics, rather than underlining (except with URL addresses); and all illustrations, figures, and tables are placed within the text at the appropriate points, rather than at the end.
The text adheres to the stylistic and bibliographic requirements outlined in the Author Guidelines, which is found in About the Journal.
If submitting to a peer-reviewed section of the journal, the instructions in Ensuring a Blind Review have been followed.
for every submitted article, the author is obliged to follow the terms and conditions in accordance with Style Guide of Indonesian Research Journal on Education (can be downloaded on the Style Guide page)
Instructions for author of Indonesian Research Journal on Education
ï» The text submitted by the author is the original scientific paper, has never been published, and is not being submitted for publication in other media / journals
ï» The text proposed may be results of the study (field / literature), conceptual ideas, studies, application of theories, and criticism in the social, humanities, and technology
ï» Scripts can be written either in Indonesian or in English. The manuscript is written with Time News roman of font 11 with single (1) spacing and single column format.
ï» Article Format has met the Article Template Indonesian Research Journal on Education.
ï» The article must be under 20 % check by plagiarism software
ï» The article does not contain the results of plagiarism, falsification, and fabrication of data.
ï» References at least 15 articles (required with DOI article) and must used manager Reference (mendeley, etc.)
ï¶ Paper Title
This is your opportunity to attract the readerâ€™s attention. Remember that readers are the potential authors who will cite your article. Identify the main issue of the paper. Begin with the subject of the paper. The title should be accurate, unambiguous, specific, and complete. Do not contain infrequently-used abbreviations.
The title of the paper should be in 13 pt bold Font Berlin Sans FB and be centred. The title should have 0 pts space above and 0 pts below.
ï¶ Authors Name and Affiliations
Write Author(s) names without a title and professional positions such as Prof, Dr, Production Manager, etc. Do not abbreviate your last/family name. Always give your First and Last names. Write clear affiliation of all Authors. Affiliation includes a name of department/unit, (faculty), a name of university, address, country. Please indicate Corresponding Author (include email address) by adding an email symbol in superscript behind the name.
Author names should be in 12 pt Adobe Hebrew, sentence case with 0 pts above and 0 pts below. Author addresses are superscripted by numerals and centered over both columns of manuscripts. Author affiliations University name / institution / research study / company should be in 10 pt Adobe Hebrew. The body of the text should commence single lines (24 points) below the last address.
Present/permanent address. If an author has moved since the work described in the article was done, or was visiting at the time, a 'Present address' (or 'Permanent address') may be indicated as a footnote to that author's name. The address at which the author did the work must be retained as the main, affiliation address.start by adding an email symbol and then email, font Adobe Hebrew 10 pt and centred.
All contributing authorsâ€™ names should be added, and their names arranged in the correct order for publication. A correct email address should be supplied only by the corresponding author. The full name of each author must be present in the exact format they should appear for publication, including or exclude any middle names or initials as required. The affiliation of each contributing author should be correct on their individual author name.
The criteria of authorship are as follows; Substantial contributions to the conception or design of the work; or the acquisition, analysis, or interpretation of data for the work; Drafting the work or revising it critically for important intellectual content; Final approval of the version to be published; Agreement to be accountable for all aspects of the work in ensuring that questions related to the accuracy or integrity of any part of the work are appropriately investigated and resolved.
The word â€œAbstractâ€ should put in centred, bold, 10 point, Time News Roman paragraf space after 6 and before 6 poin. Abstract should contain summary of the all research (aim, scope, result and conclusion) should be not more than 300 words, justified, 9 point, and single spacing. For keywords wrote in italic and then separated using symbol (;) with maximum are 5 words.
Article Organization The body of articles should be organized (at least) into the IMRaD structure as follow;
Introduction provides adequate background or context (problem and its significance) of the study. The subject should not be written extensively. It is expected that rationale or purpose of the study (gap analysis), the objective in general and specific, and hypothesis (if any) should be expressed clearly. Present a clear "state of the art" of the subject, which discussed literature and theoretical concepts behind it. A concise general background may be included in the article. Present at least 5 (five) recent related works to support the novelty of the research.
Methodology provides sufficient details to allow the work to be reproduced by an independent researcher. Methods that are already published should be summarized and indicated by a reference. If quoting directly from a previously published method, use quotation marks and also cite the source. Any modifications to existing methods should also be described. Indicate the participants observed, including demographic data, number of respondents, the rationale of respondents selection, etc. Describe the design of the experiment, such as the experiment procedures, surveys, interviews, observation characteristics, etc. Write the complete research procedure. Be sure that explanations made in the article will allow other researchers reproduce the work, or make future work out of it.
ï¶ Results and discussions
Results and discussions. Write results in logical sequence. Results with important findings should be present first. When presenting results in a table or figure, do not repeat all those contents in the text. Present only the summary of the text. Describe only new and important aspects of the study. Do not repeat all information from results section or any section above. Present limitations of the study. Write the issues that are new or unsolved, for future research. This section consists of the information on What/How the presented data were produced, no raw data should be present in the article. The produced data are presented in tables, or figures with an explanation of what is the result/findings from the work. The section will also need to address connections between findings and basic concepts or hypothesis made earlier. Authors should also express whether any arguments were needed relating to other works from other researchers. Write implications made by the work related to theoretical or applications.
Conclusions. The conclusion should be linked to the title and objectives of the study. Do not make statements not adequately supported by your findings. Write the improvements made to industrial engineering field or science in general. Do not make further discussions, repeat the abstract, nor only list the results of research results. Do not use bulleted points, use paragraphed sentences instead. maximum 200 word.
ï¶ Biographies and Acknowledgments
Biographies and Acknowledgments Those who contribute but do not meet all criteria for authorship should not be listed as authors, but they should be acknowledged at the end of the text. Only the names of the persons but not their role should be written under acknowledgement section. Authors must declare all sources of external research funding in their article and a statement to this effect should appear in the Acknowledgements section. Authors who wish to include these items should save them together in the MS Word file to be uploaded with the submission. If they are to be included, a brief professional biography of 100 words maximum should be supplied for each named author.
ï¶ Symbols and units, numbers
Symbols and units, numbers If symbols are defined in a nomenclature section, symbols and units should be listed in alphabetical order with their definition and dimensions in SI units. Please use the SI set of units as much as possible. Wherever the application domain uses a different set of units widely, please minimize the use of non-standard units or non-standard symbols for those units. As examples, the use of â€œaâ€ for the year (annum) is depreciated and the use of â€œyâ€ is encouraged instead. Similarly, â€œhâ€ should be used for hours instead of â€œhrâ€ and â€œtâ€ instead of â€œtonâ€ or â€œtonneâ€. It is important to take care of the case in which the measurement units are typed. E.g. â€œKmâ€ does not mean â€œkilometersâ€, but â€œKelvin-metersâ€.
When providing numerical values followed by measurement units, please leave a regular space or non-breaking space between each value and the measurement unit. This also includes percentages and degrees Celsius (e.g. 42 % or 35 %, 234 Â°C, 504 K). This rule also applies to the unit for a litre, which is recommended to be capital â€œLâ€. The authors are encouraged to render the numbers according to the International rules, specifying the dot as a decimal separator and the comma as a thousand separator.
Equations. Make sure that placing and numbering of equations are consistent throughout your manuscript.
Left aligns the equation and put the number of the equation flush-right, using a Right Tab on the right margin. Please reference equations in the text by writing: Eqn. .. (do not use Equation ..) In principle, variables are to be presented in italics.
ï¶ Figures and Tables
Figures and Tables. should be originals or sharp prints. Please use the SI set of units as much as possible. Figures and tables should be centered and placed either at the top or at the bottom of the page. Please do not render tables as pictures and please do not use too small font sizes in the illustrations. Please use the following fonts in your illustrations:Time News Roman, Symbol, or use fonts that look similar.
If your figures and tables are created in a Microsoft Office application (Word, PowerPoint, Excel) then please supply 'as is' in the native format, too. Regardless of the application used other than Microsoft Office, when your electronic artwork is finalized, please 'Save as' or convert the images to one of the following formats (note the resolution requirements for line drawings, halftones, and line/halftone combinations given below):
ï” EPS (or PDF): Vector drawings, embed all used fonts.
ï” TIFF (or JPEG): Color or grayscale photographs (halftones), keep to a minimum of 300 dpi.
ï” TIFF (or JPEG): Bitmapped (pure black & white pixels) line drawings, keep to a minimum of 1000 dpi.
ï” TIFF (or JPEG): Combinations bitmapped line/half-tone (color or grayscale), keep to a minimum of 500 dpi.
Set table number and title flush centred above table. Horizontal lines should be placed above and below table headings and at the bottom of the table. Vertical lines should be avoided. The title should use Time News Ruman 10, with 0 pt before and 6 pt after the paragraph, center-justified at the top of the table. Tables have to be included in the text. If a table is too long to fit one page, the table number and heading should be repeated on the next page before the table is continued. Alternatively the table may be spread over two consecutive pages (first an even numbered, then an odd-numbered page) turned by 90, without repeating the heading.
ï¶ Figure captions
Figure captions. Fig. 1 Captions should be placed below each illustration, font Time News Roman, 9 pts. Figures and figure captions should be placed center; two narrow figures may be placed side-by-side. Please reference figures in the text by writing: Fig. .. (do not use Figure ..).
ï¶ Concerning references
Concerning references. In order to give our readers a sense of continuity, we encourage you to identify Indonesian Research Journal on Education (IRJE) articles of similar research in your papers. Please, do a literature check of the papers published in Indonesian Research Journal on Education (IRJE) in recent years.
For citation and model citation we are using American Psychiatric Association (APA), you can find it using Mendeley or other reference manager program or using citation machine on the internet, such as http://www.citationmachine.net/apa/cite-a-report/manual.
References must be listed at the end of the paper. Do not begin them on a new page unless this is absolutely necessary. Authors should ensure that every reference in the text appears in the list of references and vice versa.
Some examples of how your references should be listed are given at the end of this template in the â€˜Referencesâ€™ section, which will allow you to assemble your reference list according to the correct format and font size. When you are referencing conference proceedings, page numbers should be provided. If proceedings are not available, the lecture identification â€“ e.g. lecture number should be provided instead. When you are referencing websites, an author or authoring institution should be provided. The date of the last access should be provided as well.
Acknowledgements. Collate acknowledgments in a separate section at the end of the article before the references and do not, therefore, include them on title page, as a footnote to the title or otherwise. List here those individuals who provided help during the research (e.g., providing language help, or proof reading the article, etc.). Acknowledgment must be written in this paper. Using 11 pt font Time News Roman, 6 pt after headings.
Aunio, P., & Niemivirta, M. (2010). Predicting children â€™ s mathematical performance in grade one by early numeracy. Learning and Individual Differences, 20(5), 427â€“435. https://doi.org/10.1016/j.lindif.2010.06.003
Aunola, K., Leskinen, E., Lerkkanen, M., & Nurmi, J. (2004). Developmental Dynamics of Math Performance From Preschool to Grade 2, 96(4), 699â€“713. https://doi.org/10.1037/0022-0618.104.22.1689
Clements, D. H. (2002). Computers in Early Childhood Mathematics, 3(2). Dehaene, S. (2009). Origins of Mathematical Intuitions The Case of Arithmetic, 259, 232â€“259. https://doi.org/10.1111/j.1749-6632.2009.04469.x
Depdiknas. (2007). Pedoman Pembelajaran Permainan Berhitung Permula Di Taman Kanak-kanak. Jakarta: Depdiknas. Dhingra, R., Sharma, N., & Kour, M. (2009). Relationship between Parental Perception and Young Childrens â€™ Usage of Computers, 28(3), 167â€“170.
Fakhrudin, A. . (2010). Sukses Menjadi Guru TK/PAUD. Yogyakarta: Bening. Hong, H. (1996). Effects of Mathematics Learning Through Children's Literature on Math Achievement and Dispositional Outcomes. Early Childhood Research Quarterly, 11, 477-494.
The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.