Analisis Risiko Bahaya dengan Metode Hazard Identification, Risk Assessment and Determining Control (HIRADC) pada Industri Kecil Mebel  (Studi Kasus : Mebel Homedecore, Driyorejo, Gresik)

Berliana  Safitri; Paramaditya  Arismawati; Ayu Endah  Wahyuni

doi:10.31004/jutin.v7i3.29486

Authors

Berliana Safitri Teknik Industri Telkom University Surabaya
Paramaditya Arismawati Telkom University Surabaya, Surabaya, Indonesia
Ayu Endah Wahyuni Telkom University Surabaya, Surabaya, Indonesia

DOI:

https://doi.org/10.31004/jutin.v7i3.29486

Keywords:

Risk, Hazard, HIRARDC

Abstract

The HomeDecore furniture industry is a small industry sector that focuses on manufacturing furniture products from wood-based materials. The production process in this furniture involves the process of cutting wood, smoothing wood and the assembly process. This process poses a risk of hazards that result in accidents at work. Broadly speaking, work accidents are caused by two factors, namely human actions that do not meet work safety (unsafe action) and unsafe conditions. The purpose of this research is to identify hazard risks and determine control measures to reduce the risk of work accidents. This research was conducted using the Hazard Identification, Risk Assessment And Determining Control (HIRADC) method to identify hazards, analyze risks and determine risk control measures to ensure the safety of workers. With this research, hopefully it can help reduce the risk of hazards. Based on the results of this study, several recommendations are determined according to the hazard control hierarchy by carrying out control measures such as elimination, substitution, engineering control, administrative and PPE (Personal Protective Equipment.

References

Afandi, R., Desrianty, A., & Yuniar. (2014). Usulan Penanganan Identifikasi Bahaya Menggunakan Teknik Hazard Identification Risk Assessment and Determining Control (HIRADC) (Studi Kasus di PT. Komatsu Undercarriage Indonesia). Jurnal Online Institut Teknologi Nasional, 2(3).

Astuti, A. S., Diyani, R. S., Muhammad, R., & Serena, S. (2018). Identifikasi Bahaya-Penilaian Risiko Di Industri Farmasi Area Warehouse (Gudang Penyimpanan) Menggunakan Metode Hazard Identification Risk Assessment And Determination Control (HIRADC). Teknik Lingkungan.

Dermawan, M. I., & Sahri, M. (2022). Analisis Manajemen Risiko Dengan Metode HIRADC Pada Industri Meubel UD Ulum Jaya. Jurnal Kesehatan, 21(1).

Indonesia, K. P. (2023, 1 15). Kemenperin dan Kemnaker Tingkatkan Pembinaan SDM Industri di Bidang K3. Retrieved from https://kemenperin.go.id/artikel/23830/Kemenperin-dan-Kemnaker-Tingkatkan-Pembinaan-SDM-Industri-di-Bidang-K3

Pamungkas, G. P. (2021). Manajemen Risiko Bahaya Berbasis HIRADC (Hazard Identification, Risk Assessment And Determining Control) Pada Pekerjaan Bore Pile ( Studi Kasus : Proyek Gedung Sembilan Lantai Universitas Alma Ata Yogyakarta).

Putri, J. I., & Ulkhaq, M. M. (2017). Identifikasi Bahaya dan Risiko Pada Area Produksi CV Mebel Internasional, Semarang Dengan Metode Job Safety Analysis. Industrial Engineering Online Journal, 6(1).

Ramadhania, M., Saputra, N., Herdiansyah, D., & Dihartawan. (2021). Analisis Hazard Identification, Risk Assesment, Determining Control (HIRADC) Pada Aktivitas Kerja Di UD Ridho Abadi Tangerang Selatan Tahun 2020. Environmental Occupational Health and Safety Journal, 2(1).

Rohmatillah, W., Sari, D., & Yuniast, T. (2021). Analisis Strategi Proaktif Dalam Mencegah Risiko Bahaya Dengan Metode HIRADC Di CV X Pakis. Media Husada Journal of Environmental Health, 1(1).

Salsabila, K. G., Anindita, G., & Amrullah, H. N. (2018). Identifikasi Bahaya Pekerjaan Perbaikan Aerator Menggunakan Metode HIRADC Di Perusahaan Lubricant Refinery. Conference On Safety Engineering, 2(1).

Septyani Prihatiningsih, T. S. (2014). Penerapan Metode HIRADC Sebagai Upaya Pencegahan Kecelakaan Kerja Pada Pekerja Mesin Rewinder. The Indonesian Journal of Occupational Safety, Health and Environment, 1(1).

Supit, T., & Jan, A. H. (2015). Analisis Persediaan Bahan Baku Pada Industri Mebel Di Desa Leilem. Jurnal EMBA, 3(1).

Umami, M. K., Arif, M., Arifin, Z., & Mu’arrifah , I. (2021). Evaluasi Dan Rekomendasi Penerapan Keselamatan Dan Kesehatan Kerja Pada Industri Kecil Mebel (Studi Kasus Pada “Mebel Purnama” Di Jombang). JAPTI: Jurnal Aplikasi Ilmu Teknik Industri, 2(1).