Analisa Perbaikan Mesin Cutting Guna Mengurangi Frekuensi Kerusakan dan Jam Perbaikan Mesin

Authors

  • Salsa Veby Indah Pratiwi Universitas 17 Agustus 1945 Surabaya
  • Hery Murnawan Universitas 17 Agustus 1945 Surabaya

DOI:

https://doi.org/10.31004/jutin.v7i2.27800

Keywords:

Historical mesin; Frekuensi kerusakan; Presentase kerusakan; Planning;

Abstract

The smoothness of the production process in the midst of increasingly tight product competition is one of the important factors that needs to be prioritized, especially in production facilities or machines used for operation. losses for the company in terms of time, costs and reduced machine capacity. So an improvement analysis is carried out by looking at historical data on the cutting machine. This historical analysis can determine corrective and maintenance actions that must be carried out. After carrying out historical analysis, it was found that in 2023 the average percentage of machine damage was 44% with a total downtime of 1115.98 hours and total production of 2541.48 hours. loss amounted to Rp. 132,057,145, while in 2024 the average percentage of damage was 46% with a total downtime of 373.24 hours and total production of 809.33 hours. It is said that the company experienced a production process due to damage to the plong machine amounting to 54% with a total loss amounting to Rp. 65,228,673. Historically this machine is a reference in reducing the frequency and time of damage

References

Ahyari, Agus, 2002. Manajemen Produksi Perencanaan Sistem Produksi. Edisi Empat, BPFE : Yogyakarta.

Ahmad,Mas’ud,(2016).”Manajemen Pemeliharaan Mesin Copymilling Dengan Menerapkan Total Productive Maintenance (TPM) di Inter Metal Technology.

Assauri, Sofyan, “Manajemen Produksi dan Operasi”, Penerbit UI, Jakarta, 2008.

Amalia, S., Subekti, A., & Setiawan, P. A. (2017). Perencanaan kegiatan perawatan dengan metode RCM II (Reliability Centered Maintenance) dan penentuan persediaan suku cadang pada boiler perusahaan rokok. Proceeding 1st Conference on Safety Engineering and Its Application.

Farhan,Muhamad,(2021).” Implementasi Perawatan Preventive Pada Mesin Produksi Untuk Meningkatkan Kehandalan Mesin Menggunakan Metode Reliability Centered Maintenance (Rcm)”.

Fernandio,Louise.(2019).”Analisa Perancangan Penggantian Mesin Pompa Distribusi di Ipa PDAM Tirtanadi Sunggal”.

Hery, Kholis (2023).”Analisa Pengukuran Efektivitas Mesin Packing Di Unit 2 Menggunakan Overall Equipment Efectivinees (OEE) Dengan Pendekatan Total Produktive Maintenance”. Jurnal Teknik Industry Heuristic Vol.1 No 1, April 2023, Hal 76-77.

Jusolihun, N. (2019). Perancangan Sistem Perawatan Mesin Air Jet Loom (AJL) dengan Menggunakan Reliability Centered Maintenance (RCM) (Studi Kasus: PT. Primissima Yogyakarta).

Pujawan, Nyoman,(2009). “House Of Risk:a modal for proactive supplay chain risk managemen”, vol.15 No.6, 2009.

Setiawan, F.D. 2008. Perawatan Mekanikal Mesin Produksi. Yogyakarta : Maximus.

Suryana,Wiwik,(2021).” Analisis Pemeliharaan Mesin Produksi Dengan Metode Rcm (Reliability Centered Maintenance) Pada Pt. Eluan Mahkota Kabupaten Rokan Hulu”.

Ulfa,Maria,(2020).” Pengendalian Persediaan Spare Part Dengan Pendekatan Berbasis Resiko”.

Downloads

Published

2024-04-22

How to Cite

Pratiwi, S. V. I., & Murnawan, H. . (2024). Analisa Perbaikan Mesin Cutting Guna Mengurangi Frekuensi Kerusakan dan Jam Perbaikan Mesin . Jurnal Teknik Industri Terintegrasi (JUTIN), 7(2), 1083–1092. https://doi.org/10.31004/jutin.v7i2.27800

Issue

Section

Articles of Research

Most read articles by the same author(s)

1 2 > >>