Analisis kualitas pada Proses Pencelupan dengan Metode DMAIC di Departemen Dyeing PT. Indonesia Synthetic Textile Mills

Alvian  Ristandi; Abidin  Abidin

doi:10.31004/jutin.v7i3.27672

Authors

Alvian Ristandi Universitas Buddhi Dharma
Abidin Abidin Universitas Buddhi Dharma

DOI:

https://doi.org/10.31004/jutin.v7i3.27672

Keywords:

Quality, Defect, DMAIC, Pareto, Fishbone

Abstract

In the industrial sector, the large number of companies creates fierce competition. This encourages the company to increase its competition, which can be done through quality improvement. All companies are trying to achieve this, including PT. Indonesia Synthetic Textile Mills. PT. Indonesia Synthetic Textile Mills is a company engaged in the textile industry. In the production process, defective products are still produced. The application of the define, measure, analyze, improve, and control (DMAIC) method found 16 types of defects. A sigma level of 4.34 indicates a fairly good product quality level. Most defects come from six types of defects, namely: kako yogore, kako shiwa, kako atari, iro yogore, atary calender, and friction mark. Defects are caused by man, material, machine, method, environment, and process factors. For quality improvement should be done from defects that most often occur.

Author Biography

Abidin Abidin, Universitas Buddhi Dharma

Kepala Program Studi Teknik Industri, Universitas Buddhi Dharma

References

Anggi., A.A ., Ahmad, A., & Y.D, F. (2023). Pengendalian Kualitas Produksi Sprayer pada PT. Golden Agin Nusa Menggunakan Metode Six Sigma. Journal of Economics and Business UBS, 12(5), 2750–2762.

Adeodu, A. O., Kanakana-Katumba, M. G., & Maladzhi, R. (2020). Implementation of Lean Six Sigma (LSS) Methodology, through DMAIC Approach to Resolve Down Time Process; A Case of a Paper Manufacturing Company. Proceedings of the 2nd African International Conference on Industrial Engineering and Operations Management. In Proceedings of the 2nd African International Conference on Industrial Engineering and Operations Management (pp. 37–47). harare: IEOM Society International. Retrieved 28 April 2024 from

Aditama, R., & Imaroh, T. S. (2020). Strategy for Quality Control of “Ayam Kampung” Production Using Six Sigma-DMAIC Method (Case Study in CV. Pinang Makmur Food). International Journal of Innovative Science and Research Technology. International Journal of Innovative Science and Research Technology, 5(1), 538–553. Retrieved 28 April 2024

Andriani, D. puspita, & Kusuma, L. T. W. N. (2018). Teknik dan Manajemen Kualitas Teori, Strategi, dan aplikasi (1st ed.). Yogyakarta: Teknosain.

Azahro, F. R., Saryadi, S., & Waloejo, H. D. (2022). Pengaruh Harga dan Kualitas Produk terhadap Kepuasan Pelanggan Produk Indihome PT Telkom Kabupaten Pati. Jurnal Ilmu Administrasi Bisnis, 11(4), 814–821.

Bhargava, M., & Gaur, S. (2020). Process Improvement Using Six-Sigma (DMAIC Process) in Bearing Manufacturing Industry: A Case Study. In IOP Conf. Series: Materials Science and Engineering (pp. 1–14). IOP Conference Series: Materials Science and Engineering. Retrieved 28 April 2024 from https://doi.org/10.1088/1757-899X/1017/1/012034

Firmansyah, R., & Yuliarty, P. (2020). Implementasi Metode DMAIC pada Pengendalian Kualitas Sole Plate di PT Kencana Gemilang. Jurnal PASTI, 14(2), 167. Retrieved 28 April 2024 from https://doi.org/10.22441/pasti.2020.v14i2.007

Hernikasari, I., Ali, H., & Hadita, H. (2022). Model Citra Merek Melalui Kepuasan Pelanggan Bear Brand: Harga Dan Kualitas Produk. Jurnal Ilmu Manajemen Terapan, 3(3), 329–346. Retrieved 28 April 2024 from https://doi.org/10.31933/jimt.v3i3.837

Ishak, A., Siregar, K., Ginting, R., & Gustia, D. (2020). Reducing waste to improve product quality in the wooden pallet production processby using lean six sigma approach in PT. XYZ. In IOP Conference Series: Materials Science and Engineering (pp. 1–10). Medan: IOP Publishing. Retrieved 28 April 2024 from https://doi.org/10.1088/1757-899X/1003/1/012090

Kumar, P., Khan, M. A., Mughal, U. K., & Kumar, S. (2021). Exploring the Potential of Six Sigma (DMAIC) in Minimizing the Production Defects. In Proceedings of the International Conference on Industrial & Mechanical Engineering and Operations Management (pp. 36–46). Dhaka: IEOM Society International. Retrieved 28 April 2024 from

Kurnia, H., Jaqin, C., & Manurung, H. (2022). Implementation Of The Dmaic Approach For Quality Improvement At The Elastic Tape Industry. Jati Undip: Jurnal Teknik Industri, 17(1), 40–52. Retrieved 28 April 2024 from https://doi.org/10.14710/jati.17.1.40-51

Manap, abdul, Sani, I., Sudirman, A., Noviany, H., Rambe, M. T., Raflina, R., … Widiati, E. (2023). Manajemen Pemasaran Jasa: Konsep Dasar dan Strategi. (fachrurazi,Ed.) (1st ed.). purbalingga: eureka: media aksara.

Maulidia, A., Prihatini, A. E., & Prabawani, B. (2021). Pengaruh Kualitas Produk Dan Citra Merek Terhadap Keputusan Pembelian Produk Kecantikan Mustika Ratu (Studi Pada Konsumen Mustika Ratu Di Kota Semarang). Jurnal Ilmu Administrasi Bisnis, 10(1), 803–812.

Meidiarti, D. (2020). Pengendalian Kualitas Produk Cacat Batang Alumunium Ec Grade Menggunakan Pendekatan Failure Mode And Effect Analysis. Jurnal Ilmiah Teknik Industri, 8(1), 18–24. Retrieved 28 April 2024 from https://doi.org/10.24912/jitiuntar.v8i1.6341

Mittal, A., Gupta, P., Kumar, V., Owad, A. Al, Mahlawat, S., & Singh, S. (2023). The performance improvement analysis using Six Sigma DMAIC methodology: A case study on Indian manufacturing company . Heliyon, 9(3), 1–11. Retrieved from https://doi.org/10.1016/j.heliyon.2023.e14625

Monday, L. M. (2022). Define, Measure, Analyze, Improve, Control (DMAIC) Methodology as a Roadmap in Quality Improvement. Global Journal on Quality and Safety in Healthcare, 5(2), 44–46. Retrieved 28 April 2024 from

Monoarfa, M. I., Hariyanto, Y., & Rasyid, A. (2021). Analisis Penyebab bottleneck pada Aliran Produksi briquette charcoal dengan Menggunakan Diagram fishbone di PT. Saraswati Coconut Product. Jambura Industrial Review (JIREV), 1(1), 15–21. Retrieved 28 April 2024 from https://doi.org/10.37905/jirev.v1i1.8217

Patricia, D. A., & Widiartanto, W. (2020). Pengaruh Country of Image dan Perceived Value terhadap Keputusan Pembelian Liptint TonyMoly Melalui Minat Beli sebagai Variabel Intervening (Studi Pada Mahasiswi FISIP UNDIP). Jurnal Ilmu Administrasi Bisnis, 9(4), 590–598.

Pratama, A. A., & Chirzun, A. (2023). Analisis Pengendalian Kualitas Dalam Meningkatkan Pelayanan Asuradur Kredit Usaha Rakyat Menggunakan Six Sigma. Jurnal Teknologi Dan Manajemen Industri Terapan(JTMIT), 2(3), 191–199.

Suhardi, Y., Syachroni, A., Burda, A., & Darmawan, A. (2020). Pengaruh Keragaman Produk, Persepsi Harga, dan Kualitas Pelayanan Terhadap Keputusan Pembelian Konsumen. Jurnal Stei Ekonomi, 29(2), 17–30.

Utomo, Y., Jumali, M. A., & Salsabila, D. N. (2022). Analisis Critical To Quality(Ctq) Pada Percetakan Koran Di Pt Temprina Media Grafika (Jawa Pos Group). Jurnal Teknik WAKTU, 20(2), 103–109. Retrieved 28 April 2024 from https://doi.org/10.36456/waktu.v20i02.5876

Wiyono, B. (2020). Produk-Produk Jasa Pendidikan. INTIZAM: Jurnal Manajemen Pendidikan Islam, 3(2), 35–45.

Yusnita, E., & Puspita, R. (2020). Analisa Pengendalian Kualitas Paving Block dengan Metode New Seven Tools di CV. Arga Reyhan Bahari Sumatera Utara. JIME (Journal of Industrial and Manufacture Engineering), 4(2), 138–147.