Perancangan Tungku Pembakar Logam

Authors

  • Hardian Pratama Program Studi Teknik Mesin, Fakultas Teknik dan Perencanaan, Universitas Ekasakti
  • Risal Abu Program Studi Teknik Mesin, Fakultas Teknik dan Perencanaan, Universitas Ekasakti
  • Zulkarnain Zulkarnain Program Studi Teknik Mesin, Fakultas Teknik dan Perencanaan, Universitas Ekasakti
  • Mukhnizar Mukhnizar Program Studi Teknik Mesin, Fakultas Teknik dan Perencanaan, Universitas Ekasakti
  • Azmil Azman Program Studi Teknik Mesin, Fakultas Teknik dan Perencanaan, Universitas Ekasakti

DOI:

https://doi.org/10.31004/jutin.v7i1.25498

Keywords:

Blacksmith, metal burning furnace, coal

Abstract

The design of this metal burning stove was made to speed up and make it easier for blacksmith craftsmen to produce quality products. Using this tool, blacksmith craftsmen can produce a stable flame in the metal burning process. Where the planning for a metal burning stove uses coal as the main fuel, because coal can produce a longer lasting fire compared to charcoal or firewood. The working principle of this metal burning stove is to use a machine tool that is driven by a blower to increase or enlarge the air or gas pressure that will transmit to the connecting pipe, and produce a stable fire so that combustion is faster and more efficient. The metal burning furnace planning process consists of: Power planning in the metal burning furnace planning p_d = 0.3 Kw, using a blower with a rotation of 2800 rpm, using 2 pipes as air conductors, the furnace volume is 7,385.28 m^3 and using a C18 castabble, weight 25 kg, cement resistance capacity 1800?.

References

Mubarok, M. (2018). Dasar Perencanaan dan Pemilihan Elemen Mesin By Sularso. Diunduh pada tanggal 23 Mei 2023, dari Dasar Perencanaan dan Pemilihan Elemen Mesin by Sularso | Mahmud Mubarok - Academia.edu.

Mubarrak, S. (2021). SISTEM KERJA MESIN BLOWER DAN ROTARY PADA PENGOLAHAN KAYU MANIS PT CASSIA CO-OP SUNGAI PENUH – JAMBI – INDONESIA. Diunduh pada tanggal 21 mei 2023, dari http://eprints.polbeng.ac.id/3096/4/KP-3204181224-FULL%20TEXT.pdf

Santriawan, N. (2020). Pengertian Metode Penelitian dan Jenis-jenis Metode Penelitian. Diunduh pada tanggal 23 Mei 2023, dari Pengertian Metode Penelitian Dan Jenis-jenis Metode Penelitian - Ranah Research.

Sularso. Kiyokatsu. (1987). Dasar perencanaan dan pemilhan elemen mesin. Dilihat pada tanggal 06 Juni 2023.

Harahap, Ucok. (2007) Jenis-jenis tungku. Diunduh pada tanggal 20 mei 2023, jam 20:10 wib dari https://p2k.unkris.ac.id

Downloads

Published

2024-01-19

How to Cite

Pratama, H., Abu , R. ., Zulkarnain, Z., Mukhnizar, M., & Azman, A. (2024). Perancangan Tungku Pembakar Logam. Jurnal Teknik Industri Terintegrasi (JUTIN), 7(1), 536–642. https://doi.org/10.31004/jutin.v7i1.25498

Issue

Section

Articles of Research