EVALUASI PENERAPAN SISTEM MANAJEMEN KESELAMATAN DAN KESEHATAN KERJA (K3) PADA INDUSTRI GALANGAN KAPAL KECIL DI INDONESIA
DOI:
https://doi.org/10.31004/jkt.v4i4.16083Keywords:
Evaluasi, Penerapan SMK3, Galangan KapalAbstract
Peraturan Pemerintah (PP) Nomor 50 Tahun 2012 tentang Sistem Manajemen Keselamatan dan Kesehatan Kerja (SMK3) telah berjalan selama lebih dari 10 tahun dan menjadi suatu pedoman atau acuan yang bersifat wajib untuk dilaksanakan bagi perusahaan yang memiliki potensi bahaya besar atau mempekerjakan paling sedikit 100 orang pekerja. Penerapan SMK3 merupakan salah satu upaya preventif yang harus dilakukan akibat meningkatnya risiko kecelakaan kerja. SMK3 adalah penerapan sistem manajemen keselamatan dan kesehatan kerja yang akan dapat meminimalkan risiko kerugian moral dan moneter, kehilangan jam kerja, serta keselamatan orang dan lingkungan .Penelitian ini adalah penelitian gabungan (mixed method). Dalam penelitian ini, teknik pengolahan data secara kuantitatif dilakukan untuk mengukur hasil penerapan SMK3 di industri galangan kapal kecil PT. X menggunakan instrumen audit tingkat awal (64 kriteria SMK3) sesuai PP No. 50 Tahun 2012. Penelitian ini dilakukan pada Bulan September 2023 - Oktober 2023 yang dengan pengambilan data observasi pada industri galangan kapal kecil PT X. Digunakan untuk mengukur tingkat pencapaian penerapan SMK3 di 3 industri galangan kapal kecil PT. X berdasarkan instrumen audit SMK3 PP No. 50 Tahun 2012 tingkat awal (64 kriteria) Manajer HSE dari setiap perusahaan di PT. X merupakan responden yang memberikan dokumen dan keterangan. Hasil penelitian didapatkan fakta bahwa Tingkat kesesuaian penerapan SMK3 PT. X : 21,88 % ,Tingkat ketidaksesuaian penerapan SMK3 PT. X sebesar 78,12 % dengan temuan mayor sebesar 51 %, temuan minor sebesar 45 %, dan temuan kritikal sebesar 4 %.References
Aliyev, A. (2022). Investigating the implementation of the occupational safety and health management system in the scope of ship construction and repair yards in Azerbaijan compatible with ISO 45001. https://commons.wmu.se/all_dissertations/2122
Aprilliani, C., Fatma, F., Syaputri, D., Marganda, S., Manalu, Halomoan Lukman, Sulistiyani Risnawati, H., Dame, Tanjung Simangunsong, Evalina Mahda, Charisha & Arina, Kumala
& Romas, Nuraliza Firdaus, L., & Firdaus, F. (2022). Keselamatan dan Kesehatan Kerja (K3) PT Global Eksekutif Teknologi. PT Global Eksekutif Teknologi.
Arifin, M. D., & Octaviani, F. (2022). Occupational Health and Safety Analysis Using HIRA and AS/NZS 4360:2004 Standard at XYZ Shipyard. International Journal of Marine Engineering Innovation and Research, 7(3), 2548–1479.
AS/NZS 4360:2004. (2004). Australian/New Zealand Standard Risk MAnagement. Australian Standards / New Zeland Standards 4360:2004.
Awaliah, F., & Setiawan, D. (2023). Analisis Penerapan Pendekatan Audit Jarak Jauh Dampak dari Pandemi Covid-19 (Studi Kasus: Inspektorat Jenderal Kementerian Kesehatan RI). Owner: Riset & Jurnal Akuntansi, 7(1), 741–752. https://doi.org/10.33395/owner.v7i1.1311
Ayunita, D. R., Kurniawan, B., & Widjasena, B. (2021). Analisis Ketidaksesuaian Penerapan Sistem Manajemen Keselamatan dan Kesehatan Kerja (SMK3) di Isntitusi Pendidi-kan X Berdasarkan Hasil Audit SMK3. Jurnal Riset Kesehatan Masyarakat, 2021(1), 1. https://ejournal2.undip.ac.id/index.php/jrkm/index
Babur, F., Cevikcan, E., & Durmusoglu, M. B. (2016). Axiomatic Design for Lean-oriented Occupational Health and Safety systems: An application in shipbuilding industry. Computers and Industrial Engineering, 100, 88–109. https://doi.org/10.1016/j.cie.2016.08.007
Badri, A., Nadeau, S., & Gbodossou, A. (2021). Integration of OHS into risk management in an open-pit mining project in Quebec (Canada). Minerals, 1(1), 3–29. https://doi.org/10.3390/min1010003
Barlas, B., & Izci, F. B. (2018). Individual and workplace factors related to fatal occupational accidents among shipyard workers in Turkey. Safety Science, 101(October 2016), 173–179. https://doi.org/10.1016/j.ssci.2017.09.012
Cassell, C., Nadin, S., & Older Gray, M. (2001). The use and effectiveness of benchmarking in SMEs. Benchmarking: An International Journal, 8(3), 212–222. https://doi.org/10.1108/EUM0000000005624
Creswell, J. W. (2013). Research Design Pendekatan Kualitatif, Kuantitatif, dan Mixed. Pustaka Pelajar.
Cui, X. (2022). A strategic decision support tool for shipyard production performance evaluation and support in budgeting for performance improvement (Issue April). https://stax.strath.ac.uk/concern/theses/xp68kg791%0Ahttp://stax.strath.ac.uk/downloads/vd66w035q
Department of Occupational Safety and Health, M. of H. R. (MOHR) M. (2020). Guidelines on Occupational Safety and Health (OSH) Risk Management for Small and Medium Enterprises. Department of Occupational Safety and Health (DOSH) Ministry of Human Resources (MOHR) Malaysia. https://asean.org/storage/Guidelines-on-OSH-Risk-Management.pdf
Edriansah, D., Parawansa, D. A. S., & Nursyamsi, I. (2022). Analisa Peran Auditor Internal terhadap Kinerja Perusahaan Dengan Pengendalian Internal sebagai Variabel Intervening (Studi Kasus pada PT Semen Tonasa). SEIKO?: Journal of Management & Business, 5(1), 630–640. https://doi.org/10.37531/sejaman.v5i1.2284
Efe, B. (2019). Analysis of operational safety risks in shipbuilding using failure mode and effect analysis approach. Ocean Engineering, 187(July), 106214. https://doi.org/10.1016/j.oceaneng.2019.106214
Enne, & Suharni, S. (2023). Analisis Implementasi Standar K3 Rumah Sakit Pada Rumah Sakit Dr. Tadjuddin Chalid Makassar Tahun 2022. Journal of Muslim Community Health (JMCH) 2023, 4(3), 176–186. https://doi.org/10.52103/jmch.v4i3.1142JournalHomepage:https://pasca-
umi.ac.id/index.php/jmch
Erniati, B., Mahyuddin, Nur, K. N., Tumpu, M., Rosyidah, M., Erdawaty, A. M. S., Yanti, Ihsan, M., Sudirman, Makbul, R., & Rachim, F. (2021). Manajemen K3 Konstruksi. In Yayasan Kita Menulis. https://www.google.co.id/books/edition/Manajemen_K3_Konstruksi/lDUqEAAAQBAJ?hl=id&gbpv=1&dq=manajemen k3 konstruksi&pg=PR4&printsec=frontcover
European Commission. (2013). Guidance on the protection of the health and safety of workers from the potential risks related to nanomaterials at work - Guidance for employers and health and safety practitioners.
Federal Aviation Adminitration. (2023). Safety Management System. United States Department of Transportation. https://www.faa.gov/about/initiatives/sms/explained
Fragiadakis, N. G., Tsoukalas, V. D., & Papazoglou, V. J. (2014). An adaptive neuro-fuzzy inference system (anfis) model for assessing occupational risk in the shipbuilding industry. Safety Science, 63, 226–235. https://doi.org/10.1016/j.ssci.2013.11.013
Gündo?du, F. K., & Seyfi-Shishavan, S. A. (2021). Occupational Risk Assessment Using Spherical Fuzzy Safety and Critical Effect Analysis for Shipyards. Journal of Eta Maritime Science, 9(2), 110–119. https://doi.org/10.4274/jems.2021.59480
Health and Safety Executive. (2013). Managing for health and safety HSG65 (Vol. 1). https://doi.org/978 0 7176 6604 1
Henryadi, T. Z. (2019). Metode Penelitian: Pedoman Penelitian Bisnis dan Akademik. Lembaga Pengembangan Manajemen dan Publikasi Imperium (LPMP Imperium).
Hossain, N., Nur, F., & Jaradat, R. M. (2018). An analytical study of hazards and risks in the shipbuilding industry. International Annual Conference of the American Society for Engineering Management, November.
Hui, B. (2017). How to Implement OHSAS 18001?? December.
ILO. (2019). Safety and healthin ship buildingand ship repair. In International Labour Organization.
Irawan, C. N., & Widiawan, K. (2023). Perancangan Sistem Manajemen Keselamatan dan Kesehatan Kerja (SMK3) di PT X Berdasarkan Peraturan Pemerintah (PP) Nomor 50 Tahun 2012. Jurnal Titra, 11(2), 129–136.
Irzal. (2016). Dasar-dasar Kesehatan dan Keselamatan Kerja. Kencana.
Izci, F. B., Gökyay, O., & Barlas, B. (2023). Investigation of non-fatal occupational accidents and their causes in Turkish shipyards. International Journal of Occupational Safety and Ergonomics, 1–9. https://doi.org/10.1080/10803548.2022.2157545
Jeong, B. Y. (2021). Prevalence of occupational accidents and factors associated with deaths and disabilities in the shipbuilding industry: Comparisons of novice and skilled workers. Work, 69(3), 997–1005. https://doi.org/10.3233/WOR-213530
Kaassis, B., & Badri, A. (2018). Development of a preliminary model for evaluating occupational health and safety risk management maturity in small and medium-sized enterprises. Safety, 4(1), 9–11. https://doi.org/10.3390/safety4010005
Kemas, P., & Syam, R. (2023). Efektivitas Penerapan Standar Operasional Prosedur (SOP) PT. Pelni Cabang Makassar Selaku Operator Kapal Penumpang Pasca Pandemi. Jurnal Manajemen Dan Start-Up Bisnis, 7(1), 77–86.
Kim, K. W., Park, S. J., Lim, H. S., & Cho, H. H. (2017). Safety Climate and Occupational Stress According to Occupational Accidents Experience and Employment Type in Shipbuilding Industry of Korea. Safety and Health at Work, 8(3), 290–295. https://doi.org/10.1016/j.shaw.2017.08.002
Lawrence Wynn, M. (2008). Highlights of an industry benchmarking study: Health and safety excellence initiatives. Journal of Chemical Health and Safety, 15(3), 22–24. https://doi.org/10.1016/j.jchas.2007.10.002
Li, Y., & Guldenmund, F. W. (2018). Safety management systems: A broad overview of the literature. Safety Science, 103(November 2017), 94–123. https://doi.org/10.1016/j.ssci.2017.11.016
Ligade, A. S., & Thalane, S. B. (2013). Occupational Health and Safety Management System (OHSMS) Model for Construction Industry. International Journal of Research in Engineering and Technology, 02(13), 395–399. https://doi.org/10.15623/ijret.2013.0213074
Liu, Y., Ma, X., Qiao, W., Luo, H., & He, P. (2022). Human factor risk modeling for shipyard operation by mapping fuzzy fault tree into bayesian network. International Journal of Environmental Research and Public Health, 19(1). https://doi.org/10.3390/ijerph19010297
Maharani, F. T., & Lynch, Z. (2021). The Implementation of the POPMAR (Policy, Organising, Planning and Implementing, Measuring Performance, Audit and Reviewing) Model in Occupational Health and Safety Risk Management in an Indonesian Batik Company. The Indonesian Journal Of Occupational Safety and Health, 10(3), 420. https://doi.org/10.20473/ijosh.v10i3.2021.420-432
Mangkunegara, A. P. (2017). Manajemen Sumber Daya Manusia Perusahaan. In PT Remaja RosdaKarya (pp. 1–172).
Marthinus, A. P., Manoppo, F. J., & Lumeno, S. S. (2019). Model Penerapan Sistem Manajemen Keselamatan dan Kesehatan Kerja pada Proyek Infrastuktur Jalan Tol Manado-Bitung. Jurnal Sipil Statik, 7(4), 433–448.
Masjuli, Taufani, A., & Kasim, A. A. (2019). Sistem Manajemen Keselamatan dan Kesehatan Kerja. In Badan Standardisasi Nasional (Vol. 2, Issue 2).
Maudica, S. B., Denny, H. M., & Kurniawan, B. (2020a). Implementasi SMK3 Standard ILO 2001 pada Salah Satu Perusahaan Galangan Kapal. Jurnal Teknik Industri Undip, 15(3), 144–152.
Maudica, S. B., Denny, H. M., & Kurniawan, B. (2020b). Tantangan dan Hambatan Proses Audit SMK3 di Sebuah Perusahaan Galangan Kapal di Era Pandemi Covid-19. Jurnal Kesehatan Masyarakat, 8(September), 1–5.
Mevia, F. M. A. (2020). Galangan Kapal – Definisi, Jenis, Metode, dan Industrinya. In Wira.
Morgado, L., Silva, F. J. G., & Fonseca, L. M. (2019). Mapping occupational health and safety management systems in Portugal: Outlook for ISO 45001:2018 adoption. Procedia Manufacturing, 38(2019), 755–764. https://doi.org/10.1016/j.promfg.2020.01.103
Mu?enski, V. (2017). Occupational Health and Safety Risk Assessment for Demolition Processes in Construction. Ergonomics International Journal, 1(2), 1–9. https://doi.org/10.23880/eoij-16000112
Narandreswara, R., & Pamardi, L. P. (2023). Evaluasi Sistem Keselamatan dan Kesehatan Kerja K3 pada Stasiun Sterilizer menggunakan Metode Hirarc. Agroforetech, 1(September), 2032–2039.
Oktora, B., & Marlina, L. (2022). Analisis Peran Internal Audit Pada Pengendalian Internal Piutang Pada PT. Pos Indonesia (Persero) Cabang Meulaboh. Jurnal Pendidikan Dan Konseling, 4(2018), 1707–1715.
Othman, I., Ibrahim, M. F. H., Shafiq, N., Mohamad, H., & Kamil, M. S. (2018). HSE Management System for Hotwork Operation at High Elevation in Shipbuilding Project. MATEC Web of Conferences, 203, 1–10. https://doi.org/10.1051/matecconf/201820302005
Purnawati, E., Syafa’at, A. Y., Febianto, D. D., Sari, F. D., & Adhimah, L. F. (2023). Perancangan Aplikasi Digital Bidang Keselamantan dan Kesehatan Kerja dengan User Interface Berbasis Android. Jurnal Sistem Informasi, 12(1), 257–268.
Ramli, N. M., & S, I. H. (2023). Penerapan Sistem Manajemen Keselamatan dan Kesehatan
Kerja di RSUD Labuang Baji Makassar Tahun 2023. JournalofMuslim Community Health(JMCH), 4(4), 99–111.
Santoso, S., Rochman, Fourmarch, Pawenary, & Fithri, P. (2020). Transformasi Digitalisasi Pelaporan HAZOB Untuk Meningkatkan Kinerja Keselamatan Kerja di Perusahaan. Jurnal Sains, Teknologi Dan Industri, 18(1), 11650.
Siregar, R. A., Parhusip, A. A., & Sari, T. N. (2022). Peranan Audit Internal Dalam Menunjang Efektivitas Pengendalian Internal Penjualan dan Penagihan Piutang pada PT. Mabar Mitra Bersama. Accumulated Journal, 4(1), 96–107. http://dx.doi.org/10.22303/accu
Straus, A., & Corbin, J. (2013). Dasar-dasar Penelitian Kualitatif. Pustaka Pelajar.
Suandi, S., Adi Wibowo, S., & Auliasari, K. (2020). Pengenalan Tools Keselamatan Kerja Menggunakan Augmented Reality Berbasis Android. JATI (Jurnal Mahasiswa Teknik Informatika), 4(1), 93–101. https://doi.org/10.36040/jati.v4i1.2334
Suma’mur, P. K. (2009). Keselamatan Kerja dan Pencegahan Kecelakaan (C. H. M. Agung (ed.)).
Tarwaka. (2016). Dasar-dasar Keselamatan Kerja serta Pencegahan Kecelakaan di Tempat Kerja. Harapan Press.
Thiede, I., & Thiede, M. (2015). Quantifying the costs and benefits of occupational health and safety interventions at a Bangladesh shipbuilding company. International Journal of Occupational and Environmental Health, 21(2), 127–136. https://doi.org/10.1179/2049396714Y.0000000100
Thomas, M. J. W. (2012). A Systematic Review of Insert Document Title the Effectiveness of Safety Management Systems. Australian Transport Safety Bureau.
Tsoukalas, V. D., & Fragiadakis, N. G. (2016). Prediction of occupational risk in the shipbuilding industry using multivariable linear regression and genetic algorithm analysis. Safety Science, 83, 12–22. https://doi.org/10.1016/j.ssci.2015.11.010
Wahidi, S. I., Pribadi, T. W., Rajasa, W. S., & Arif, M. S. (2022). Virtual Reality Based Application for Safety Training at Shipyards. IOP Conference Series: Earth and Environmental Science, 972(1). https://doi.org/10.1088/1755-1315/972/1/012025
Wulandari, K. N., Tualeka, A. R., Widajati, N., & Fitri, N. (2018). Risk Assessment on Hull Painting Process at Shipyard. KnE Life Sciences, 4(5), 30. https://doi.org/10.18502/kls.v4i5.2537
Zaman, M. B., Baheramsyah, A., & Ashari, I. (2021). Analysis of Work Accident Factors in the Shipyard. IOP Conference Series: Earth and Environmental Science, 698(1). https://doi.org/10.1088/1755-1315/698/1/012016
Downloads
Published
Issue
Section
License
Copyright (c) 2023 Hugo Nainggolan, Hendra Hendra
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work’s authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
